Hammer Drills

The Bosch GBH2-28L 1-1/8 In. SDS-plus(R) Bulldog(TM) Xtreme Max Rotary Hammer features a powerful 8.5-amp motor and KickBack Control. This feature is an integrated sensor to stop tool rotation during bit bind-up situations. A tool that upholds the tradition in the line of legendary Bosch Bulldog hammers, the GBH2-28L combines user comfort with versatile drilling and hammering functions. It provides counter-balanced Vibration Control for more comfortable handling of the hammer. Ideal for masonry pros or general contractors, this tool weighs only 6.9 Lbs. but delivers 2.4 Ft.-Lbs. of impact energy and 0-5,100 bpm. It has a multifunction mode selector for drilling versatility - drilling only, hammer drilling and chiseling. This Bulldog has ideal features for hard-working pros, including a variable-speed reversing trigger for accurate bit starting, Vario-Lock positioning for the optimal chiseling angle, a HammerHook that allows the user to hang the tool on the job and an ergonomic D-handle for user comfort. The SDS-plus(R) system provides for tool-free bit changes.

This Bosch hammer drill is engineered for tough jobs, with next-gen convenience and CORE18V(R) power. The GSB18V-535CB25 18V EC Brushless Connected-Ready 1/2 In. Hammer Drill/Driver kit features a tool with Bluetooth(R) connectivity (which connects with an optional Connectivity Tool Module), linking the free Bosch Toolbox app on any connected device for enhanced tool control and feedback. The kit includes two next-gen CORE18V(R) 4 Ah Advanced Power Batteries. Each keeps the power and runtime, while losing the weight, with 21700 cell technology. The CORE18V(R) matches the power of the original two-layer 4 Ah battery with half the number of cells. It features the CoolPack 2.0 heat-management system. This hammer drill's powerful EC Brushless motor delivers 535 In.-Lbs. of torque and 0-28,500 bpm. It has variable speed settings; one for high-speed (0-1,900 rpm) and one for high power (0-600 rpm). The cordless drill has KickBack Control to reduce the risk from sudden rotational torque reaction, a 20+1 precision clutch; an all-metal chuck that provides durability and a longer belt clip.

HAMMER DRILL BRUSHLESS 18V

Reduce the risk of injury from kickback or bind-up situations with Bosch Active Response Technology(TM) featured in the new the Bosch HDH181X 18V Brute-Tough(TM) 1/2" Lithium-Ion hammer drill/driver. The innovative on-board acceleration sensors automatically shut the tool down when a potentially dangerous torque reaction occurs. The Bosch engineered 4-pole motor provides 752"/lbs of torque, making it powerful and efficient for drilling a broad range of high torque bits such as spades and augers. As with all Bosch best built cordless tools, advanced electronic motor and cell protection help prevent overheating and overloading for extended tool life and runtime. A built-in LED light illuminates the workspace for optimal visibility. All-metal Bosch gears and Durashield(TM) tool housing hold up in even the toughest jobsite conditions, including withstanding multiple 12 Ft. drops onto solid concrete. The HDH181X is compatible with all Bosch 18V Lithium-Ion batteries and chargers for maximum versatility. Bosch 18V batteries feature cool pack technology, which integrates advanced heat conducive housing to keep the battery cooler and extend the life.
Features

Active Response Technology superior control in bind-up situations
Heavy Duty Construction built tough with Bosch exclusive Durashield housing and all metal gearbox to withstand rugged jobsite conditions
Maximum Power 752 in lbs. of torque powered by a 4-pole motor
Advanced Electronics individually customized electronics protect the motor and battery increasing tool and battery life
Flexible Power System compatible with all Bosch Lithium Ion batteries
LED Light great for dark or enclosed areas
Auxiliary Handle increased control with longer handle length and new tongue and groove structure to prevent handle slippage

The Bosch HDS181A-02 Compact Tough 1/2 In. Hammer Drill/Driver kit delivers a drill with Bosch's innovative, canned 18V motor, making it a lighter tool with a more compact design but the same driving power as the previous generation of 18V hammer drill/driver. The HDS181A features a heavy-duty chuck that helps prevent drill bits from slipping during high-torque applications, thanks to high clamping force. The drill is a powerful tool, providing 600 In.-Lbs. of torque and two drilling speeds (0-1,700 RPM for high speed and 0-500 RPM for torque). It also delivers up to 27,000 BPM in hammer mode for masonry. It is one of the tools in the Bosch Compact Tough design, with the shortest head-length in class (7.5 In. long) and a weight of only 2.7 Lbs., but with plenty of power. It has an Electronic Motor Protection system to help protect it from overload. This kit comes with two 18V 2.0 Ah SlimPack batteries and an 18V charger. The drill provides an LED light for visibility in hard-to-see areas.

6.1 ft-lb of impact energy, up to 20% more than other combo rotary hammers
SDS-max (r) bit system for tool-free bit changes
Vario-Lock mechanism allows 12 positions for best chisel angle
Combination dual mode selector knob rotary hammer mode or hammer-only mode
Service minder brushes
Innovative service modules

The bosch rh540m 1-9/16 in sds-max (r) combination hammer is a combo rotary hammer and hammer-only tool designed for concrete contractors and professional remodelers who need a powerful and versatile tool. it delivers 6.1 ft-lb of impact energy while weighing in at only 15.2 pounds the motor is rated at 170 to 340 rpm in rotary mode and 1200 to 2750 bpm in hammer mode, which will easily reduce concrete to dust. its sds-max (r) bit system allows tool-free and one-handed bit changes. the vario-lock mechanism lets users angle the chisel into 12 different positions to optimize the working angle. the hammer has a dual mode selector knob and service minder brushes, which clearly indicate when preventive maintenance is required

Features

Cost-competitive 18V cordless impact drill powered by Li-ion battery
The single sleeve keyless drill chuck allows for easy bit installation/removal
This model is compact and lightweight for easy handling
Conveniently located push button for forward and reverse
High comfort grips for reduced fatigue upon use
Two-speed gearbox
Metal gears for long service life and durability

HAMMER DRIVER DRILL 18V BL1815

Features The Highest Torque In The Industry!

eXtreme Protection Technology (XPT) offers maximum protection against dust, debris and liquids for optimal performance in extreme conditions
Battery fuel gauge indicates approximate remaining battery power
Brushless DC motor with high power to weight and size ratio
Brushless DC motor generates less heat buildup and is ideal for prolonged use in manufacturing / production applications
Battery protection system provides over-discharge, temperature and circuit protection for enhanced performance, battery cycle life and overall battery life
21 clutch settings deliver up to 1,090 in. lbs. of torque
All metal gears for more efficient power transmission
Ultra-compact design (only 8-1/8" long)
Dual LED job lights with afterglow feature
Improved ergonomic soft rubber grip design for vibration absorption and comfortable operation features re-contoured rear grip portion and ribbed grip for improved hold

This 18v LXT SDS-PLUS Rotary Hammer is capable of drilling through steel, wood and masonry with ease. With the power of Lithium-Ion you can be sure to get the job done, wherever you are!

Lithium-ion's 40% weight saving means 18 volt power can be obtained by a battery that weighs the same as a 12 volt Ni-MH battery.
Lithium-ion batteries have greater life spans than their Ni-MH or Ni-Cad counterparts giving 430% greater run time.
Conveniently located push button for forward and reverse.
High comfort grips.
One-touch sliding chuck for easy bit changes.
Rotation mode: The chisel can rotate a full 360 degrees with 40 different locking positions.
Triple operation mode: Rotary only, hammer only and rotary hammer.

Makita's FIRST 18VX2 Direct (36V) 1" Rotary Hammer
Hammer & Rotation / Hammer Only / Rotation Only Features Quick Change Drill Chuck
SDS-PLUS Shank
Variable Speed, Reversible
Accepts 2 x 18V Li-Ion batteries without a battery converter for use with existing 18V Li-Ion battery platform
Center of gravity located close to rear handle resulting in ideal tool balance during operation
Torque limiter stops rotation if bit jams for increased operator safety and enhanced motor protection
40 angle bit positions enable chisels to be positioned at optimum angle of operation
Rubber housing bumper protects mode selector switch and gear housing from damage
LED job light with afterglow feature
One touch sliding chuck enables quick and easy bit changes
Sliding rear handle for increased vibration absorption
Ergonomic soft rubber grip design for vibration absorption and comfortable operation

FEATURES:
o Powerful 6.0 AMP motor with 0-2,800 RPM & 0-44,800 BPM for the most demanding applications
o Lightweight (4.4 lbs) with large drilling capacity up to 5/8" in concrete o 2-mode operation for "Rotation Only" or "Hammering with Rotation" for multiple applications
o Soft grip handle provides increased comfort on the job
o Extended life brushes are longer for more work between service intervals and less downtime
o Recessed lock-on button for continuous use
o All-ball bearing construction for longer tool life

The Makita 3/4 in. 2-Speed Hammer Drill has variable-speed operation to help with starting holes in concrete and steel. Start with low gear for speeds up to 900 RPM and 18,000 BPM. Then switch to high to take advantage of up to 2,300 RPM and 46,000 BPM. The 1/2 in. keyed chuck is powered by a 6 Amp motor and ball bearings translate to years of dependable use. This hammer drill also has adjustable side handles and a depth gauge for drop-in anchors. It comes with a storage case.

Powerful 6 AMP motor for the most demanding applications
2-speed (0-900 & 0-2,300 RPM) with speed control switch
2-mode operation for "Rotation Only" or "Hammering with Rotation" for multiple applications
Variable speed switch for easy starting of holes
All-ball bearing construction for longer tool life
Adjustable side handle for greater control
Depth gauge for "drop-in" type anchors
Recessed lock-on button for continuous use
Lightweight (6.4 lbs.) for reduced operator fatigue
Double insulated

INCLUDES:
o (1) Side Handle (451749-9)
o (1) Depth Gauge (331886-4)
o (1) Tool Case (824695-3)

FEATURES:
o Powerful 7 AMP motor delivers 2.1 ft.lbs. of impact energy to handle the most demanding applications
o Anti-Vibration Technology (AVT(R)) is an internal counterbalance system that greatly reduces vibration by moving a counterweight in the opposite direction of drive piston
o Integrated damper spring at the base of the impact bolt is engineered to absorb impact vibrations from the drill bit
o Torque limiting clutch engineered to prevent gear damage by automatically disengaging gears if the bit binds
o L.E.D. light illuminates drilling surface for more productivity in low light applications
o Recessed hammer function selector located below gear housing for improved durability
o Variable speed trigger enables user to match the speed to the application for greater versatility
o 3-mode operation for various applications with "Rotation Only", "Hammering with Rotation" or "Chipping Only" functions
o 40 bit angle settings allow the bit to be set at different positions for operating convenience
o Ergonomic "Pistol-grip" handle with rubberized soft grip for increased comfort
o "No hammering when idling" function helps increase tool life
o Designed to reduce dust exposure in drilling applications with dust extraction accessory (part no.195173-3)

SPECIFICATIONS:
o Amps: 7
o Capacity (Concrete Drilling): 1"
o Capacity (Concrete Drilling w/ Core Bit): 2-11/16"
o Impact Energy (Joules): 2.9 J
o Impact Energy (ft. lbs): 2.1
o Vibrations (m/s2): 11.5
o Blows Per Minute (Variable Speed): 0 - 4,600 BPM
o No Load Speed (Variable Speed): 0 - 1,200 RPM
o Overall Length: 15-1/8"
o Cord Length (ft): 13.1'
o Bit Type: Accepts SDS-Plus
o Sound Rating (Decibels): 90 dB (A)


The Makita 1 in. AVT rotary hammer (model HR2611F, with pistol-grip) is engineered with anti-vibration technology (AVT(R)), an internal counterbalance system for significantly less vibration. The HR2611F combines performance and power with less vibration in a compact size, and is ideal for a range of applications including overhead drilling. The HR2611F has a 7 AMP motor that delivers 2.9 joules (2.1 ft. lbs.) of impact energy to handle the most demanding applications. The 3-mode operation offers rotation only, hammering with rotation or chipping only for multiple applications. Modes can be easily changed with a recessed hammer-function selector, which is located below the gear housing for improved durability. The LED light at the base of the tool's pistol grip illuminates the work surface in low-light conditions. The HR2611F is engineered for a range of applications including overhead drilling into concrete, wood and metal, removing tile, and more. It is ideal for a range of trades including masons, plumbers, electricians, sprinkler installers, city maintenance crews, and general contractors seeking a best-in-class 1 in. rotary hammer.

FEATURES:
o Powerful 11 AMP motor delivers 8.4 ft.lbs. of impact energy to handle the most demanding applications
o Anti-Vibration Technology (AVT(R)) is a synchronized, three-component system that more effectively reduces vibration resulting in a low 5m/s2
o Air actuated counterbalance directs air pressure from the crank and barrel room into the counterbalance cylinders to move counterweight pistons in the opposite direction of the drive piston actively reducing vibration
o Vibration absorbing housing features a spring loaded main handle and upper housing that move independently of the motor and drive mechanism effectively isolating most of the vibration away from the user
o Integrated damper spring at the base of the impact bolt is engineered to absorb impact vibrations from the drill bit
o Lock-on or trigger activation in "Chipping Only" mode with a push button start/stop control for more convenient operation
o Constant speed control automatically applies additional power to the motor to maintain speed under load to complete the most challenging jobs
o Soft start suppresses start-up reaction for more control and better accuracy
o L.E.D. service light notifies the user approximately 8 hours before the brushes need to be replaced
o L.E.D. power light indicates switch failure or cord damage
o Variable speed control dial enables user to match the speed to the application for greater versatility
o Torque limiting clutch engineered to prevent gear damage by automatically disengaging gears if the bit binds
o Sequential impact timing delivers timed hammering during rotation to minimize overlapping bit impacts for up to 50% faster drilling
o Automatic brush cut-off protects commutator from damage for longer tool life
o 2-mode operation for "Chipping Only" or "Hammering with Rotation"
o 24 bit angle settings allow the bit to be set at different positions for operating convenience
o One-touch sliding chuck for quick bit changes